Papers Published in International/National Journals (Total 38):

(SCI/SCIE)

1. "Experimental Evaluation of Fracture Models Parameters and its Validation for Naturally Aged Composite Solid Propellant". Defence Science Journal, 2025 Vol.75 No. 4 (2025).

  https://doi.org/10.14429/dsj.20583

2. "Heat transfer analysis of nine cylinders arranged inline and staggered at subcritical Reynolds number". Article Numerical Heat Transfer Part A Applications,Volume 86,Year 2024, Pages 8795-8816.

  https://doi.org/10.1080/10407782.2024.2363495 

3. "Thermal performance of solar flat plate collector using energy storage phase change materials". Energy storage, Volume (Issue number): 6, Page No: 1-14 (2024).

  https://doi.org/10.1002/est2.577.

4. "Heat transfer analysis of nine cylinders arranged inline and staggered at subcritical Reynolds number". Article Numerical Heat Transfer Part A Applications, Volume 86, Year 2024, Pages 8795-8816.

https://doi.org/10.1080/10407782.2024.2363495.

5. “Thermal comfort assessment of non-air-conditioned railway coach in Central India during extreme summer”. Thermal Science and Engineering Progress. Vol 46, pp 102206 (2023). 

https://doi.org/10.1016/j.tsep.2023.102206.

6. “Thermal performance of four cylinders in different layouts of spacing ratios under cross-flow at Reynolds number of 35000”. Ocean Engineerig.Vol 281,pp 14834 (2023). 

https://doi.org/10.1016/j.oceaneng.2023.114834.

7. “Analysis of various design parameters of a desert cooler “. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects.Vol-45(2), pp 4898-4916 (2023). 

https://doi.org/10.1080/15567036.2023.2206812.

8. “Experimental investigation of locally available Torai (luffa cylindrica) as evaporative cooling pads”. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects.Vol 45(1), pp 2523-2539 (2023). 

https://doi.org/10.1080/15567036.2023.2188317.

9. "Heat transfer analysis of nine cylinders arranged inline and staggered at subcritical Reynolds number. Article Numerical Heat Transfer Part A Applications, Volume 86, Year 2024, Pages 8795-8816. 

https://doi.org/10.1080/10407782.2024.2363495.

10. “Experimental Investigation of silica-gel based composite adsorbent for adsorption refrigeration system ”.Thermal Science and Engineering Progress .Vol 29, pp 101194. (2022). 

https://doi.org/10.1016/j.tsep.2022.101194.

11. “Analysis of flow characteristics of two circular cylinders in cross-flow with varying Reynolds number”. Journal of Thermal Analysis and Calorimetry.Vol 147(10), pp 5549-5574 (2021). 

https://doi.org/10.1007/s10973-021-10933-w.

12. "Review on improvement of adsorption refrigeration systems performance using composite adsorbent: current state of art." Energy Sources, Part A: Recovery, Utilization, and Environmental Effects. pp 1-25 (2021). 

https://doi.org/10.1080/15567036.2021.1927252.

13. "Estimation of thermal properties of fuzzy carbon fiber heat exchanger using micromechanics approach." Journal of Indian Chemical Society.Vol.97,pp 1169-1177. (2020). 

http://indianchemicalsociety.com/portal/uploads/journal/July-39.pdf.

14. "A review on coatings based on modified surface topography-biomimetic approach for the inhibition of marine bio fouling." Journal of Indian Chemical Society.Vol.97, pp 1047-1054. (2020). 

http://indianchemicalsociety.com/portal/uploads/journal/July-17.pdf.

15. "Performance analysis of desalination system working on humidification- dehumidification coupled with solar assisted air heater and wind tower: Closed and open water cycle”, Solar Energy .Vol. 205, pp 254-262 (2020). 

https://doi.org/10.1016/j.solener.2020.04.083.

16. "Thermal Analysis of dual-purpose cooler used for air cooling and mild refrigeration",Thermal Science andEngineering Progress.Vol.17,pp.1- 8(2020). 

https://doi.org/10.1016/j.tsep.2020.100483.

17. "Solar desalination system integrated to use waste heat of air conditioners for continuous output: Suitable for coastal areas", Desalination and WaterTreatment.Vol 174,pp 1-10(2020). 

https://doi.org/10.5004/dwt.2020.24846.

18. "Thermal Conductivity, Thermal Diffusivity, and Volumetric Heat Capacity of Silicone Elastomer Nanocomposites: Effect of Temperature and Mwcnt and Nano-Graphite Loadings ",High Performance Polymer. Vol 30 , pp 365-374 (2017). 

https://doi.org/10.1177/0954008317698545.

19. “A report on performance of annular fins having varying thickness”. Journal of Engineering and Applied Sciences. Vol.11, No. 8 (2016).

20. "Thermal performance of functionally graded parabolic annular fins having constant weight" ,Journal of Mechanical Science and Technology.Vol.28, pp.4309-4318 (2014). 

https://doi.org/10.1007/s12206-014-0945-1.

(SCOPUS/ESCI)

 1. “Simulation of air flow behavior and its influence on thermal comfort for a naturally ventilated passenger railway coach in India”. Journal of thermal engineering, 2026, vol 12, issue 3, p1.

2. “Recently implemented edible coatings for extending the shelf life of foods: a technological enhancement perspective”. Sustainable Chemistry One World, 2025 Volume (Issue number): 8 (2025). 

https://www.sciencedirect.com/journal/sustainable-chemistry-one-world.

3. “Performance augmentation of photovoltaic modules by using fins and hybrid- innovative techniques”. International journal of ambient energy. Vol. 46, no. 1, 2507141 (2025). 

https://doi.org/10.1080/01430750.2025.2507141.

4. “An experimental investigation of the performance of cross-flow turbine: impact of number of blades in runner”. ISH Journal of Hydraulic Engineering. Vol 30, pp612-622(2024). 

https://doi.org/10.1080/09715010.2024.2393181.

5. “Experimental analysis of enhanced solar still operating with induced turbulence” Environmental Science and Pollution Research. pp 1-13 (2023). 

  https://doi.org/10.1007/s11356-023-27974-3.

 6. “Performance analysis of shell and helical tube heat exchanger using CuO/water and Al2O3/water nanofluids”. World Journal of Engineering. (2022). 

https://doi.org/10.1108/WJE-10-2021-0584.

7. “Performance analysis of variable thickness longitudinal fin with functionally graded material in dry and fully wet conditions”. World Journal of  Engineering . (2022). 

https://doi.org/10.1108/WJE-03-2022-0102.

8. "Performance analysis of Adsorption Refrigeration system working on Activated Carbon- Methanol Pair using Finned Tube type Adsorber Bed", International Journal of Heat & Technology. Vol. 39(4), pp. 1335-1342 (2021). 

  https://doi.org/10.18280/ijht.390433.

9. "Performance Analysis of Adsorption Refrigeration System using Silicagel/Methanol Pair: Experimental & Analytical", Journal of Thermal Engineering .Vol. 7 (5), pp. 1079-1089 (2021). 

https://doi.org/10.18186/thermal.977913.

10. "Comparative Thermal Analysis of Application using Novel Solar Air Heater with U-shaped Longitudinal Fins: Suitable for Coastal Regions”, Journal of Thermal Engineering. Vol.7 (5), pp. 1174-1183 (2021). [DOI: 10.18186/thermal.978017]. 

https://izlik.org/JA92DF84BC.

11. “Thermal modelling of single and double slope passive solar stills for different climatic zones in India”. International Journal of Ambient Energy.Vol-43, pp  5258-5272 (2021). 

https://doi.org/10.1080/01430750.2021.1946147.

12. "Performance Analysis of Solar Desalination System for Improved Productivity by using Waste Heat of Household Chimney”, IJRTE.Vol 8 (6), pp 3221-25 (2020). 

https://doi.org/10.35940/ijrte.F8409.038620. 

13. "Orthotropy in Annular Fins: A Collacation based  Solution", Materials Today: Proceedings. Vol. 5(14), pp. 28402-407 (2018). 

http://dx.doi.org/10.1016/j.matpr.2018.10.125.

14. "An Experimental Investigation of the Performance of Cross-flow Hydro Turbines", Energy Procedia. Vol. 141, pp. 630–634 (2017). 

https://doi.org/10.1016/j.egypro.2017.11.084.

15. “Performance of Orthotropic Annular Fins Having Contact Resistance”, Frontiers in Heat and Mass Transfer. Vol. 8(15), pp. 1-6 (2017). 

http://dx.doi.org/10.5098/hmt.8.15.

16. "A simulation based study of flow velocities across cross flow turbine at different nozzle openings", Procedia Technology. 25 pp. 974 – 981 (2016). 

https://doi.org/10.1016/j.protcy.2016.08.190.

17. "A Parametric Study of Functionally Graded Rotating Annular Fin", Procedia Engineering. 127, pp.126-132 (2015). 

https://tinyurl.com/smw4u6b2.

18. "Improving the Quality of Technical Education System using TEM", International Proceedings of Economics Development & Research.vol 75, pp. 96-100 (2014). 

https://www.academia.edu/70358767/Improving_the_Quality_of_Technical_Education_System_using_TEM. 

Book:

Title: Small Hydro Plant Installation and Performance. Publisher: Grin 

Book Chapter (Total 10)

1. Chapter Title: Design and Analysis of Adsorber in Continuous Adsorption Refrigeration System, Title of Book:  A Springer book series Lecture Notes in Mechanical Engineering, Publisher: Springer,(2026).

2. Chapter Title: Design and Performance Analysis of Thermal Compressor Using Activated Carbon-R134a Pair, Title of Book: Energy, Ecology and Environment,Volume 1, ISSN/ISBN 2352-2542. Publisher: Springer (2025).

3. Chapter Title: Assessment of the Glasshouse Application for the Glory Lily Flower in an Indian Climate , Title of Book: New Developments in Environmental and Energy Technologies , ISSN/ISBN 2524-3438. Publisher: Springer, (2025).

4. Chapter Title: Performance Analysis of a Desert Cooler for different Climatic Condition in India, Title of Book: Theoretical, Computational, and Experimental Solutions to Thermo-Fluid Systems, 285-295, ISBN 978-981-33-4164-7. Publisher: Springer, Singapore (2021).

5. Chapter Title: Numerical Study of Rotating Functionally Graded Annular Fin, Title of Book: Biodegradable Composites: Materials, Manufacturing and Engineering, 183-192, ISBN 978-3-11-060203- 6. Publisher: Walter de Gruyter GmbH & Co KG (2019).

6. Chapter Title: A CFD-based study of cross-flow turbine for tidal energy extraction, Title of Book: Sustainable Engineering Products and Manufacturing Technologies. Springer Singapore, 177-185, ISBN 978-0-12-816564-5, Publisher: Elsevier (2019).

7. Chapter Title: A study of Thermo Structural Behavior of Annular Fin, Title of Book: Innovative Design, Analysis and Development Practices in Aerospace and Automotive Engineering. Springer Singapore, 381-387, ISBN 978-981-13-27179, Publisher: Springer Nature. (2019).

8. Chapter Title: Functionally Graded Varying Annular Fin, Title of book: Design and Optimization of Mechanical Engineering Products, 197-207, ISBN- 978 152- 25-3401-3, Publisher: IGI. (2018).

9. Chapter Title: Temperature distribution in Functionally Graded Longitudinal Fins of Varying Geometry, Title of book: Hierarchical Composite Materials, 183-192, ISBN- 978-3-11-054400-8, Publisher: De Gruyter. (2018).

 10. Chapter Title: Performance of Functionally Graded Exponential Annular Fins of Constant Weight, Book Name: Advances in Functionally Graded Materials & Structure, 49-60, ISBN 978-953- 51-2274- 6. Publisher: INTECH (2016).

Papers Published in International/National Conference (Total 25)

1. Cooling of photovoltaic panel using phase change material (PCM) – A Comprehensive Review. METAL 2025, 05-06 Dec 2025, NIT Raipur. 

2. Design and Analysis of adsorber in continuous adsorbtion refrigeration system. ICFTES 2024, 6-8  June 2024. NIT Calicut. 

3. Design and Performance analysis of thermal compressor using activated carbon and R134a. SOLARIS 2024, 07-09 Feb 2024, UP Balia. 

4. Evaluation and Analysis of Greenhouse for Glory Lily Flower in Indian Climate, 5th International Conference on Environment Science and Renewable Energy (ESRE 2023), Vienna Austria, 19-21 June, 2023. 

5. Enviro-economic Technical Analysis of Solar Chimney Integrated with Soil Air Heat Exchanger: Creating Passive Thermal Comfort for Hot Subtropical Regions, 2nd International Conference on Mechanical Materisals and Renewable Energy, ICMMRE, SikkimManipal,6-7, Dec 2019. 

6. A Parametric Study of Functionally Graded Variable Thickness Longitudinal Fin under Fully Wet Condition, ICIPDMS, NIT Rourkela17-18 May 2019. 

7. Enhancing Passive Cooling and Natural Ventilation for Houses of Various Climatic Zones of India, IEEE 2nd int conf on power and energy application, Singapore, 27-30 Apr 2019. 

8. Comparative Analysis of Silica-gel/ Water and Zeolite/ Water Pair on Adsorption Refrigeration System, 2nd International Conference on New Frontiers in Engineering, Science & Technology, NIT Kurukshetra, 18-22 Feb, 2019.

9. Feasibility of Using Solar Trombe Wall For Heating and Ventilation in Different Indian Climatic Condition, Renewable Energy and Sustainable Climate (Solaris 2019) organized by IIT Delhi, 7th-9th Feb 2019.

10. Investigation of Heat Loss Coefficient by Using Flat Plate Collector for Different Climate Zones of India, Renewable Energy and Sustainable Climate (Solaris 2019) Organized by IIT Delhi , 7th-9th Feb 2019.

11. Design and performance analysis of a finned tube type thermal compressor using silica-gel/methanol adsorption system, ICRTES-2018, Feb 20-21, 2018, Visakhapatnam (India).

12. Thermal Analysis of Adsorption Refrigeration System using Silica gel-Methanol Pair, Proceeding of World Academic Science , Engineering and Technology, June 28-29, 2017 Dubai (UAE).

13. Techno Economic Analysis of Solar Distillation System Working on Humidification and De-Humidification Technique for Climatic Condition of Central India. National Conference on Source for Sustainable Climate, Organized by Bag Energy Research Society in Collaboration with IIT Delhi and CERD, IIT BHU, India, 7th-9th Feb 2017.

14. Thermodynamic analysis of diesel engine using producer gas as secondary fuel in 10th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Florida, 14-16 July 2014.

15. Combustion Modelling of Diesel Engine using Bio-Diesel as a secondary fuel in International Conference on Mechanical and Robotics Engineering (ICMRE'2012), May 26-27, 2012 Phuket.

16. Performance Analysis of Coal Fired AFBC 30 Tph Boiler and its Losses Improvement Methodology, National conference on Recent Advances in Mechanical Engineering, Jan 28-29, 2011, TPCTC’s  College of Engineering, Osmanabad.

17. Effect of Excess Air on 30 Tph AFBC Boiler on Dry Flue Gas Losses and its Efficiency, TECHNOLOGIA 2011- A National Conference, March 10-11th , 2011, MPCCET, Bhilai.

18. Effect of Excess Air on 30 Tph AFBC Boiler on Dry Flue Gas Losses and its Efficiency in TECHNOLOGIA 2011- A National Conference, March 10-11th , 2011at MPCCET, Bhilai.

19. Use and Performance Evaluation of Vertically Reinforced 1-3 Piezoelectric Composites for Active Damping of Smart Laminated Composites Shells” in 54th Conference of ISTAM, 18-22 Dec. 2009.

20. Thermodynamic Analysis of Cascading Adsorption Refrigeration system, in RAMP2009 G. B. Pant University of Agriculture & Technology, Pantnagar.

21. Analysis of engine exhaust driven silica-gel/methanol pair adsorption system in  Energy-2008, NIT Calicut.

22. Effect of generation temperature on the performance of silica-gel/water pair & zeolite/water pair adsorption refrigeration system in Nation conference of Renewable energy, 17-18 Dec2007, BIT Mesra.

23. Performance study of Bio-Fuel plant for rural electrification in international conference 15-16 Oct 2007, CMERI, Durgapur (W.B.).

24. Recent trends in Biogas plant design for the performance of Dual fuel engine in NACOEE-05 09-10 Dec. 2005 at Kovilpatti (Tamil Nadu).

25. Hearth condition of a furnace with reference to hot metal flow in 32nd National conference on Fluid Mechanics and Fluid Power 15-17 Dec-2005, Osmanabad (Maharashtra).

 Ph.D. Thesis Guided:

1. Thermal comfort analysis of a non-air-conditioned railway coach for different climatic zones of India to Shashank Shekhar Mishra (2026).

 2. Parametric study on cross-flow turbines to Vinay Verma (2025)

 3. Flow and heat transfer analysis across cylinders to Prafull Hishikar (2024).

 4. Design development analysis and applications of an evaporative cooler to Prabhat Ranjan Mishra (2024).

 5. Performance analysis of different adsorbent-adsorbate pairs for adsorption refrigeration system to Palash Soni (2022).

  6. Performance analysis of humidification-dehumidification desalination systems integrated with various thermal engineering applications to Taranjeet Sachdev (2021).

PG Thesis Guided:

1. Parametric analysis of an air-cooled heat sink for cooling of solar panels to Sunil Kurrey (2025)

2. Performance analysis of sensible heat storage system using vitrified fly ash to Paresh Mohapatra (2023).

3. Performance analysis of the solar flat plate collector with different phase-changing materials to Dinesh Babu (2022)

4. Design and performance analysis of greenhouse structure for medicinal plants in indian climate to Navneet Parihar (2022).

5. Transient analysis of orthotropic annular fins using lattice Boltzmann method to Mazhar Hussain (2021).

6. Unsteady analysis of flow field and heat transfer over single and multiple cylinders to Rupesh Deshmukh (2020).

7. A parametric study of functionally graded variable thickness longitudinal under dry and fully wet conditions to Upendra Bajpai (2019).

8. CFD-based parametric analysis of shell and helical tube heat exchanger using nano-fluids to Fanindra Kumar Verma (2019).

9. Design and performance analysis of thermal compressor using activated carbon- R134a pair to Aditya Thakur (2019).

10. Two-dimensional study of orthotropic annular fin of variable geometry to Ambuj Srivastava (2018).

11. CFD-based parametric investigation on the performance of a three-dimensional corrugated aerofoil to Bhagwati Gavel (2018).

12. Analysis of thermal stresses in an annular fin with and without rotation to Mamta Kurre (2018).

13. Thermal modelling of single and double slope passive solar stills for different climatic zones in India to Chetpelly Akshay (2018).

14. Designing of thermal compressor chamber for an adsorption refrigeration cycle system working on silica-gel- methanol pair to Palsh Soni (2017).

15. Design and experimental analysis of a mobile wind power generation system to Ritesh Matlani (2017).

16. Performance of constant-weight functionally graded annular fins of varying thickness to Tarakant Bhanu (2017).

17. A parametric study of functionally graded annular fins having power function geometry with radiation to Poshan Lal Sahu (2016).

18. A CFD-based performance study of a cross-flow turbine for tidal current energy extraction to Abhishek Chandra (2016).

19. Modelling and simulation of solar adsorption refrigeration system to Sruthi L. (2015).

20. Performance analysis of solar air heater with different types of fin profiles attached to the absorber plate under the recirculation (2015).

21. An approximate solution of stretching/ shrinking rectangular plate fin to Ankit Kumar Verma (2015).

22. Evaluation of thermal properties of silicone elastomer nanocomposites to Govind Sahu (2014).

23. Investigation of temperature distribution over the pressure tube of nuclear reactor to Shesh Naryan (2014).

24. A parametric study of banki turbine using CFD tools to Shashi Chichkede (2014).

25. A parametric study of orthotropic annular fin with contact resistance to Harpreet Kaur Assi (2013).

26. Designing of thermal compressor chamber for an adsorption cooling system using an AC and methanol pair to Atish Meshram (2013).

27. Parametric study of annular fins for constant weight to Madhusudan Patel (2012).

28. Combustion modelling of CI engine using hydrogen as a fuel to Animesh Devangan (2012).

29. Optimisation of annular fins of FGM materials to Vishal Chhugani (2012).

30. Design of an air conditioning system based on an absorption system to Ashish Upadhyay (2012).

31. Performance measurement of hydro-mechanical equipment at the shp of different heads to Atul Tiwari (2011).

32. Combustion modelling in internal combustion engine to Prerna Nashine (2011).

33. Performance and shape optimization of annular fins with different profiles to Manish Mishra (2011).

34. Performance analysis of coal-fired 30 ton/hr AFBC boiler & its losses methodology to Harish Ghritlahre (2010).

35. Thermodynamics analysis of cascading adsorption refrigeration system to Anirban Sur (2009).

36. Analysis of energy losses to improve the efficiency of coal-fired boiler by using different methods by Santosh Dubey (2009).

37. Design of adsorption system using silica-gel/methanol pair to Manish Kr. Roy (2008).

38. Shape optimisation of annular fins to Meenu Munjal (2007)

39. Design & fabrication of biogas plant and performance study of diesel & biogas dual fuel engine to Pradeep Toppo (2005).

 Membership of Professional Societies:

1. Life Membership in the Indian Society for Technical Education (ISTE, a national organization for educators) since 2007.

2. Associate Membership in the Institution of Engineers (India) (a national body for engineering professionals) since 2021.

3. Membership in the Indian Society of Heating, Refrigerating and Air Conditioning Engineers (ISHRAE, a professional society for HVAC engineers) since 2019.

Sponsored Project 

1. Partnership in research for advanced technologies in health, AI, materials and energy (PRATHAME) ANRF PAIR by ANRF NEW DELHI (2 crore 30 lakhs).

2. Optimising millet crop pattern planning in Chhattisgarh through MCDM approaches by MFPI INDIA (66 lakhs 80 thousand).

3. Investigation into the modalities for handling and disposal of coal washery rejects by HIND ENERGY AND COAL BENEFICATION (India) (6.6 lakhs).

4. Development of adsorption cylinder for methane storage by ARC VENTURES (7 lakhs 35 thousand)

5. Development of micro power generation through cross flow turbine for rural electrification, approved by UNNAT BHARAT ABHIYAN 2.0, IIT DELHI (1 lakh 50 thousand)

6. Designing of a cold storage and dehydration plant through single solar-biogas hybrid system for tribal states, sponsored by MFPI GOVT. OF INDIA (66.7 lakhs).

7. Design of a slag removal mechanism from the furnaces sponsored by REAL ISPAT AND POWER LIMITED (3.3 lakhs).

STTP/Workshop/FDP Organized

Consultancy Work

1. Steam line OCP verification for isolation tg1,2&3 Sarda Energy and minerals limited Raipur 2026.

2. Impact of underground mining on the environment, including underground mine air quality, along with the preparation of an action plan for recommended environmental mitigation measures, JPL Raigarh.  2025. 

3. Scientific study of safe pillars extraction with suitable support system in sectionalized area of no. 1 seam at RKNT incline, SRP area, SCCL. 2025.

4. Assessment report for nos. increase in coal consumption for Hira Power Plant, Hira Power and Steels Ltd., khasra no. 511/1,512/2, Urla industrial area, raipur-492003 (c.g.) 2025.

5. Security audit of the maize-based ethanol plant of 80 klpd, the managing director, m/s Maa Danteshwari Makka Prasanskaran Avam Vipdan Sahkari Samiti Maryadit, Kondagaon (c.g.), 2025.

6. Vetting of HVAC/central air conditioning heat load calculation sheet, New Bharat Refrigeration, 2024.

7. Proof checking & vetting of DBR, design & drawings of MEP services for AIIMS Raipur, CPWD, Raipur, 2024.

8. Testing the cooling load of the VRS system and water-based AC plant of the proposed new Vidhan Sabha, Raipur. Executive Engineer, PWD (e & m), Raipur Division, 2024.

9. Water quantity assessment for proposed ethanol plant, 150 kld Maa Mangla Ispat Pvt Ltd, V & PO- Natwarpur, Distt-Raigarh -496107 (CG) 2024.

10. Inspection and case study of suspension system Ambuja cement ltd p o Rawan, Baloda Bazar, P.O. Rawan, Bhatapara-493331 (c g ), 2024. 

11. Technical evaluation work of MSP Steel and Power Ltd., Raigarh MSP Steel & Power Ltd., v+p. O.-Jamgaon, Raigarh-496001 (c.g.) 2022.

12. Providing consultancy to the National Horticulture Board for cooling load calculation of a cold storage (since 2017). 

13. Testing of solar dryer for the various suppliers participating in the government tender (2023). 

14. To inspect the bifurcation of power generation through WHRB (waste heat recovery boiler) and coal-based boiler for JSW Ispat Special Products Limited (formerly known as Monnet Ispat and Energy Limited) (2022).

15. Consultancy services for providing expert/opinion on the necessity of an air-cooling condenser in place of a water-cooling condenser, Top Msp Steel & Power Ltd. (2022). 

16. Inspection of solar equipment for Jreda.

17. The premature failure of Komatsu makes engine model for SECL (2011).

18. Cooling load calculation of the indoor stadium of Raipur for Voltas PVT. Ltd. (2011).

Patent Granted